Konica Minolta Network Printer - Side 2 Lens Adjustment [16]

Key Operator Mode 9-39
Key Operator Mode
Side 2 Lens Adjustment [16]
Use this function to set the adjustment data of the magnification ratio for each tray as Side
2.
Key Operator Mode Screen 2 Side 2 Lens Adjustment Screen
1 Press [HELP] to display the Help Screen, then touch Key Operator Mode.
Enter the 4-digit Key Operator password, then touch OK to display the Key Operator
Mode Screen. (See note.)
To display menus [11] to [20] of the Key Operator Mode Screen, touch the Lower
arrow key.
2Touch [16] Side 2 lens adjustment to display the Side 2 Lens Adjustment Screen.
3Touch to highlight the desired tray key, then touch arrow keys to select an adjustment
data.
The selected data will be displayed on the highlighted tray key.
4Touch OK to complete the setting and return to the Key Operator Mode Screen.
5Touch RETURN to return to the Basic Screen and perform printing operations.
NOTE: If an invalid password is entered, enter the valid 4-digit password.