Output Modes 6-5
Output Modes
Non-Sort Mode Using Primary (Main) Tray
The Non-sort mode simply means that the offset-stacker finisher modes are not selected.
Prints will be stacked upon exit without being offset by sorted sets.
With the Primary (main) tray initially selected, FS-110/210 outputs the printed sheets
FACE DOWN in the proper order.
❒ Paper size: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5"
❒ Paper capacity for 20 lb: 500 sheets 5.5"x8.5"
3,000 sheets 8.5"x11", 8.5"x11"R (FS-110)
2,500 sheets 8.5"x11", 8.5"x11"R (FS-210)
1,500 sheets 11"x17", 8.5"x14"
CAUTION:
When the selected print quantity exceeds the Finisher’s maximum capacity, remove the printed sheets
while paper is exiting to avoid paper mishandling.
You may also ask your service representative to set the printer to stop printing when the established
capacity is exceeded.
1
2
3
1
2
3
To Next Page
Loading...
