6-12 Output Modes
Output Modes
Cover Sheet Feeder
The Cover Sheet Feeder (PI-110) is available as an option on the FS-110/210 finisher.
Load cover sheet paper into this device and use the sheets as front covers for printed sets
output to the Main tray or use the sheets as booklet-type covers for printed sets output to
the Booklet tray in the Folding or Stapling & Folding mode.
NOTES:
•Paper loaded into the cover sheet feeder cannot be printed.
• This function is incompatible with cover sheet mode in Booklet and cover mode in Sheet/Cover Insertion.
❒ Cover paper size:
Upper tray; 8.5"x11", 8.5"x11"R, 5.5"x8.5"*
Lower tray; 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5" *
*5.5"x8.5" paper is available in portrait type feeding only.
❒ Cover paper weight: 13~110 lb (200 g/m
2
cover paper)
❒ Tray capacity: 200 sheets (110 lb (200 g/m
2
cover paper) or 30 mm thick for both trays
Cover sheet
Printed set with
cover attached
Printed sets with cover
attached in Folding or
Stapling & Folding mode
To Next Page
Loading...
