FS-110/210 Finisher Specifications (continued)
6-4 Output Modes
Output Modes
Cover Sheet Feeder
❒ Paper size: Lower tray; 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5", A4, A4R (8.27"x11.69",
210 mm x 297 mm)
Upper tray; 8.5"x11", 8.5"x11"R, 5.5"x8.5
❒ Paper weight in cover sheet mode: 13~110 lb (200 g/m
2
thick paper)
❒ Paper weight in manual staple: 16~24 lb
Punching Kit
• Punch Mode (available in combination with Primary (Main) Tray output modes)
❒ Paper size: 11"x17", 8.5"x11"
❒ Paper weight: 13~45* lb
*Some 45 lb paper types may not be punched easily.
❒ Number of holes: 3 holes
❒ Hole diameter: 0.315" ± 0.020" (8.0 mm ± 0.5 mm)
❒ Hole pitch: 4.252" ± 0.020" (108 mm ± 0.5 mm)
Punching / Z-Folding Unit
• Punch Mode (available in combination with Primary (Main) Tray output modes)
❒ Paper size: 11"x17", 8.5"x11"
❒ Paper weight: 13~45* lb
*Some 45 lb paper types may not be punched easily.
❒ Number of holes: 3 holes
❒ Hole diameter: 0.315" ± 0.020" (8.0 mm ± 0.5 mm)
❒ Hole pitch: 4.252" ± 0.020" (108 mm ± 0.5 mm)
• Z-Folding Mode (available in combination with Primary (Main) Tray output modes)
❒ Paper size: 11"x17" (Z-fold), 8.5"x14" (double-fold)
❒ Paper weight: 16~24 lb
❒ Folded width*: 215 mm or less for 11"x17"
261.6 mm or less for 8.5"x14"
*The width from the paper edge to the first folded line
To Next Page
Loading...
