Media mode
270
Create Directory
This command creates a new directory within the current
directory.
Use the text edit button to access the text input dialog box,
and specify the name of the new directory (See OM page 91).
Set Date/Time
This is the date and time at which the file was saved.
The M50 does not contain an internal calendar or clock,
you must use Utility menu command Set Date/Time to
set the date and time before saving the file.
Format
This command formats the selected media. The volume
label (a name for the entire media) you specify will be
assigned to the media. The volume label you assign here
will be displayed in the SD Card (Media 0–1a). The volume
label can be a maximum of eleven characters.
After formatting, it is not possible to press the
COMPARE switch to undo formatting.
1. Make sure that the media you want to format is
inserted.
2. Select “Format” to open the dialog box.
3. In Volume Label, use the text edit button to access the
text input dialog box, and specify the volume label (See
OM page 91).
The previously-specified volume label will be displayed. If
no volume label had been specified for the media, or if a
non-DOS media was inserted, this will indicate NEW
VOLUME.
4. Specify the initialization format.
Quick Format: Normally you should use Quick Format to
initialize the media.
Full Format: All blocks in the media will be erased.
Normally there is no need for you to execute Full Format.
You should execute Quick Format instead.
Year 1980–2079
Month 1–12
Day 1–31
Hour 0–23
Minute 0–59
Second 0–59
To Next Page
Loading...
