Korg microKORG2 - Page 102

microKORG2 EFFECT, EQ section - Modulation (MOD)
102
MOD EXTRA
2. Wow Random (WowRand) [0...127]
Sets the intensity of the random modulation. Turning the knob to the right increases the amount that
other modulators are affected by the random modulation.
3. Wow Rate (WowRate) [0...127]
Adjusts the rate of modulation. Turning the knob to the right will increase how fast the effect modu-
lates the input signal.
4. Iso Frequency (IsoFreq) [-63...0...63]
Sets the center frequency of the isolator filter. Turning the knob to the right will increase the fre-
quency.
5. Iso Slope (IsoSlope) [0...127]
Adjusts the order of the isolator filter. Turning the knob to the right will increase the intensity of the
filter.
Compressor (Comp)
An effect that automatically reduces the level of a signal when the input crosses a set volume
threshold.
MOD
1. Effect Type (Type) Comp
2. Ratio [Soft, Medium, Hard, Limiter]
Sets the ratio of the compressor.
Name input: output reduction ratio
Soft 1:2
Medium 1:4
Hard 1:8
Limiter 1:100
3. Time [-63...0...63] (CC#12)
Scales the “Attack” and “Release” time of the compressor between 20%—500%.
4. Depth [0...127] (CC#111)
Sets the threshold of the compressor. Turning the knob to the right lowers the threshold.
5. Output [-24...6 dB] (CC#112)
Sets the output gain.
MOD EXTRA
2. Knee [0...127]
Sets the smoothness of the transition between compressing and not compressing a signal.
3. Attack [0...127]
Sets the speed with which the envelope follower responds to increases in amplitude. Turning the knob
to the right makes the reponse slower.