microKORG2 Part names - Front panel
15
19 ON/OFF button
Press the VOCAL PROCESSOR, EFFECT or EQ buttons while holding down this button to turn
these functions on/off (the LEDs below the buttons light up or go dark).
20 VOCAL PROCESSOR: VOCODER–HARMONIZER buttons
These select the vocal processor to edit (the button in question blinks). Pressing the button multi-
ple times will cycle through the available pages for that section.
Long-press one of these buttons to show the VOCAL SETTING page.
Press one of these buttons while holding down the ON/OFF button to turn the respective function
on/off.
21 EFFECT: MOD, DELAY, REVERB buttons
These select the effect to edit (the button in question blinks). The displayed page will update
when one of these buttons is pressed.
Long-press one of these buttons to show the EFFECT ROUTING page.
Press one of these buttons while holding down the ON/OFF button to turn the respective function
on/off.
22 EQ button
Edits the EQ (the button blinks).
Press this button while holding down the ON/OFF button to turn the function on/off.
Tip:
When there are multiple pages (such as with TIMBRE EDIT), press the respective button while hold-
ing down the FUNCTION 5 button to switch between pages in reverse order.
Tip:
The icons below the buttons indicate that you can long-press the button to access more set-
tings.