Measurements with the plate or rod method page 45
Display Action Explanation
Only if defined in
Setup:
In succession
Field
1
,
Field 2
,
Field 3
Enter the required
contents in the text
fields
The text fields, whose number is
defined in Setup, are called up in
succession (max. 3) and are used
to describe the measurement. The
text fields can be named in
LabDesk and these fields assigned
to the corresponding data of the
current measurement.
User:
please enter a
name
Use the keypad to
enter an operator
name.
Maximum 22 characters
Insert the light
phase and
immerse the
probe completely
Insert the sample
vessel containing
the light phase and
move the sample
upwards until the
edge of the plate is
just covered.
Taring
automatic
Taring the probe in the liquid
Remove the light
phase, clean the
probe, insert the
heavy phase and
position the probe
above the surface
Carry out activities
according to
display.
At the end move the
surface up until it is
just below the
probe.
To Next Page
Loading...
Need help?
General
