Data transfer to external media (optional) page 81
11. A name for a LabDesk program folder in the
Windows Start Menu will be proposed. Click
Next
to accept the name or enter a name of
your own.
12. The directories created will be listed. Start
the installation with
Install
13. When the installation process is complete, click
Finish
.
USB-Treiberinstallation (optional)
If data transfer is to be carried out via USB port a driver installation step is necessary.
*
Two driver components must be installed, so that the installation routine of the
hardware wizard must be carried out twice.
1. Insert the LabDesk installation CD. Interrupt the possibly starting installation
routine.
2. Switch on the K11 and connect the optional USB port with a USB port of the
computer.
3. The operating system notifies that a new device was found and starts the hardware
wizard.
4. Refuse a possibly proposed installation via internet (depending on the Windows
version installed) and click on
Next
.
To Next Page
Loading...
