14 BRAKE SYSTEM 98
– Open the bleeder screw again until brake fluid stops emerging.
Info
This prevents overfilling of the brake fluid reservoir.
– Tighten the bleeder screw. Remove the hose of the bleeder bottle. Mount the pro-
tection cap.
– Disconnect the bleeding device. Remove the bleeder cover.
G00808-11
–
Add brake fluid to the MAX mark
.
Brake fluid DOT 4 / DOT 5.1 ( p. 224)
– Mount the screw cap with the washer and membrane.
Info
Clean up overflowed or spilt brake fluid immediately with water.
To Next Page
Loading...
