KTM 2014 690 SMC R EU - Replacing Autodecompressor

16 ENGINE 135
» If the measured value does not meet specifications:
– Change the oil pump and, if necessary, the engine case.
305661-10
–
Check the internal rotor and external rotor of oil pumps

for damage and wear.
» If there is damage or wear:
– Change the oil pumps.
–
Check oil pump shafts

for damage and wear.
» If there is damage or wear:
– Change the oil pump shaft.
– Check both oil pump covers for damage and wear.
» If there is damage or wear:
– Change the oil pump cover.
16.4.17 Replacing autodecompressor
300107-10
–
Take the lock ring

off the autodecompression shaft and dispose of it.
300108-10
–
Pull the autodecompression shaft

from the camshaft.