EasyManua.ls Logo

Kuka KR C2 - Page 14

Kuka KR C2
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User Manual
14 of 86
BetrHbKRC2FL--USA--Fehler 11.04.00 en
Operating system crashes with exceptional error (blue screen)
Possible causes:
-- Defective memory module(s)
Elimination of fault:
-- Exchange memory module(s)
Controller hangs when loading software components
Possible causes:
-- MFC not correctly connected
-- MFC defective
-- Additional expansion card (e.g. Interbus) interfering with functioning of MFC
-- PCI bus on motherboard faulty
Elimination of fault:
-- Connect MFC correctly
-- Exchange MFC
-- Remove expansion card and run controller up again
-- Exchange PC rack
KUKA HMI does not boot and is aborted with a General Protection fault
Possible causes:
-- Defective files in the software installation
-- Settings in CMOS setup incorrect
-- Defective memory module(s)
Elimination of fault:
-- Reinstall control software
-- Check settings in CMOS setup
-- Exchange memory module(s)

Table of Contents

Other manuals for Kuka KR C2

Related product manuals