11 Oscilloscope
53 of 86
BetrHbKRC2FL--USA--Fehler 11.04.00 en
11 Oscilloscope
The submenu “Oscilloscope” contains the two additional menu items “Display” and
“Configure”.
Using the menu key “Monitor”, open first the submenu “Diagnosis” and then the menu
“Oscilloscope”. The following submenu is displayed:
The commands in the menu bar are deactivated and cannot be selected while the oscillo-
scope is being displayed or configured.
11.1 Display
This function allows you to display and analyze saved traces.
A window is opened on the display. All files which are archived in the directory
C:\KRC\Roboter\TRACE and have the extension TRC are displayed here.
To Next Page
Loading...
