10 DSE--RDW diagnostic tool (continued)
47 of 86
BetrHbKRC2FL--USA--Fehler 11.04.00 en
10.1.8 Drive bus diagnostics
The values displayed in the message window have the following meaning:
-- Number of cycles: number of data transmissions between DSE and RDC since
system switched on / reset
-- Data errors: number of data errors in the data transmissions between DSE and
RDC (sporadic errors)
-- Data errors in series: number of consecutive data errors following the first three
-- Ident errors: number of errors during transmission
Softkey assignment:
-- Start continuous display
Start / stop the continuous updating of the display
-- R e f r e s h
T riggers a one--off update of the display
To Next Page
Loading...
