11 Oscilloscope (continued)
63 of 86
BetrHbKRC2FL--USA--Fehler 11.04.00 en
Active color: Magenta
Blue
White
Magenta
Green
Red
Brown
The values for the second cursor now appear to the right of the display for the first cursor.
The difference between these two cursors is displayed on the left--hand side.
These cursors can be removed again by pressing the softkey “HCursor1” or “HCursor2” once
more.
11.1.12 The filter function
By pressing this softkey, you can switch on a software filter which “smoothes” the displayed
curves. This filter is switched off again by pressing this softkey once more.
unfiltered filtered
To Next Page
Loading...
