User Manual
62 of 86
BetrHbKRC2FL--USA--Fehler 11.04.00 en
The values for the second cursor now appear to the right of the display for the first cursor.
T wo values are displayed in this illustration, one below the other, as the softkey “Filter off”
has been selected. When inputs or outputs are displayed, the bit pattern of the selected input
or output group is shown here as well. The time difference between these two cursors is
displayed on the left--hand side.
These cursors can be removed again by pressing the softkey “VCursor1” or “VCursor2” once
more.
If you press the softkey “HCursor1”, a horizontal white line (cursor) is displayed in the
window.
When inputs and outputs are displayed, the function “HCursor” is not suitable for showing
the numbers.
Active color: Magenta
Blue
White
Magenta
Green
Red
Brown
The value where the cursor is currently positioned is displayed at the top left of the window.
Now move the cursor using the arrow keys and observe how the top left of the display
changes.
Press the softkey “HCursor2”. A second horizontal white line (cursor) is displayed in the
window.
When inputs and outputs are displayed, the function “HCursor” is not suitable for showing
the numbers.
To Next Page
Loading...
