11 Oscilloscope (continued)
61 of 86
BetrHbKRC2FL--USA--Fehler 11.04.00 en
The value that the selected curve had at the time where the cursor is currently positioned
is displayed at the top left of the window (two values are displayed in this illustration as the
softkey “Filter off” has been selected). When inputs or outputs are displayed, the bit pattern
of the selected input or output group is displayed.
Active color: Blue
Now move the cursor using the arrow keys and observe how the top left of the display
changes.
Press the softkey “VCursor2”. A second vertical white line (cursor) is displayed in the window.
Active color: Magenta
To Next Page
Loading...
