11 Oscilloscope (continued)
71 of 86
BetrHbKRC2FL--USA--Fehler 11.04.00 en
11.2.2 Trigger condition
The position in time and the trigger condition for the trace are specified in this box.
Pre--Trigger
Specify the position in time of the trace in relation to the trigger time in this box. The value
between 0% and 100% that is entered refers to the programmed trace length.
T rigger
Time
50%
Recording of data from the
trigger time
Recording of data is already started
before the trace is triggered (from 50%
of the programmed trace time)
Recordingofdatauptothe
trigger time
0%
100%
To Next Page
Loading...
