User Manual
66 of 86
BetrHbKRC2FL--USA--Fehler 11.04.00 en
11.1.14 Changing color assignments
The color assignments of the individual curves can be changed at any time. This is
necessary, for example, if more than 8 channels are assigned and not all channels can be
displayed simultaneously because there are only 8 colors available. To do so, open the
information window by pressing the softkey “Info”.
As an example, we now want to interchange the color assignments of curves 1 (currently still
blue) and 3 (currently still red).
Press the color softkey “Blue” to deactivate the assignment that is valid for the curve.
Move the highlight to the curve with the number 3.
Press the color softkey “Blue” again to assign the color blue (which has just become
available) to curve 3.
Move the highlight to curve 1, which is currently not assigned a color.
Press the color softkey “Red” here to assign the color red to this curve.
Now close the information window again.
To Next Page
Loading...
