Kuka KR C2 - Power supply unit KPS 600

8 RDC2 operating state indicators
33 of 86
BetrHbKRC2FL--USA--Fehler 11.04.00 en
8 RDC2 operating state indicators
There are two diagnostic LEDs on the RDC2.
The meaning of the LEDs is explained in the following table:
LED indicator State Meaning
G
r
e
e
n
L
E
D
Off No power supply
G
reen
L
E
D
On 3.3 V power supply OK
R
e
d
L
E
D
Flashing RDC not yet ready (boot procedure)
R
e
d
L
E
D
On RDC ready for operation
1
2
1 Green diagnostic LED 2 Red diagnostic LED
Fig. 3 LED indicators on the RDC2