Kuka KR C2 - 10 DSE- - RDW Diagnostic Tool; Main Menu of the DSE-RDW Diagnostic Tool

10 DSE--RDW diagnostic tool
39 of 86
BetrHbKRC2FL--USA--Fehler 11.04.00 en
10 DSE--RDW diagnostic t ool
This service option offers you a range of options for displaying states and fault diagnosis as
well as for configuring the DSE--RDW part of the robot system.
10.1 Main menu of the DSE--RDW diagnostic tool
Navigate within the menus using the mouse, or use the keypad to enter the number preced-
ing the menu text. The “ESC” key takes you up a level in the menu structure. Pressing the
“ESC” key at the top menu level exits the diagnostic tool.
Only alter the configuration settings if you have adequate knowledge of its
function, and of the consequences of the alteration!
The con tents of th e EEPROM in the RDC unit can be overwritten.
These data cannot be restored simply by booting the system.
Setup > Service > DSE--RDW
Softkey assignment:
-- Recognize hardware
Initiates the update of the data in the display boxes.