Kuka KR C2 - Trace Status; Trace Data

11 Oscilloscope (continued)
73 of 86
BetrHbKRC2FL--USA--Fehler 11.04.00 en
11.2.3 Trace status
The current working status of the oscilloscope can be seen in this field.
T race status Meaning
#T_WAIT Trace is started and is waiting for the trigger condition. All of
the data before the trace is triggered are recorded.
#TRIGGERED Trace is triggered and runs for as long as specified in the
boxes “Length of recording (sec)” and “Trigger moment”.
#T_END T race is finished, the data are saved on the hard disk.
11.2.4 Trace data
This box is used to define the data to be recorded.
Comment
You can enter a comment here, e.g. relating to the oscilloscope configuration.