User Manual
74 of 86
BetrHbKRC2FL--USA--Fehler 11.04.00 en
DSE (Digital Servo Electronics) card
Here you can select if you want to record data of DSE 1 (axes 1--8) or DSE 2 (axes 9--16).
If you do not want to record any DSE data at all, please select the option “No DSE data”.
Files containing the traces of DSE data are identified by the end digit “1” in the file name.
The cycle rate for recording DSE data is 2 ms. 500 data sets are generated per second.
Pressing the softkey “DSE Table” opens a window in which the values to be recorded are
listed.
Here you can define the values and axes for which traces are to be made. This is done by
navigating with the “↓” and “↑”, or “←” and “→” arrow keys. Selections are made by pressing
the space bar.
It is also possible, using the softkeys, to select or deselect all axes for a particular value,
delete the entire selection, or toggle to the I/O table or main group.
A maximum of 21 DSE channels are available at any one time.
If more than 21 channels are configured, the results will be incorrect.
To Next Page
Loading...
