Kuka KR C2 - Fault Profiles Related to the KCP; No Display on the LCD; Drives Cannot be Switched on; No Entries Can be Made Via KCP

User Manual
22 of 86
BetrHbKRC2FL--USA--Fehler 11.04.00 en
3.6 Fault profiles related to the KCP
3.6.1 No display on the LCD
Possible causes:
-- Connecting cable defective
-- KVGA defective
-- KCP defective
Elimination of fault:
-- Exchange connecting cable
-- Exchange KVGA
-- Exchange KCP
3.6.2 Drives cannot be switched on
Possible causes:
-- Connecting cable defective
-- Enabling switch jammed
-- KCP defective
-- ESC board defective
Elimination of fault:
-- Exchange connecting cable
-- Exchange KCP
-- Exchange MFC
-- Exchange ESC board
3.6.3 No entries can be made via KCP
Possible causes:
-- Connecting cable defective
-- MFC defective (CAN bus)
-- KCP defective
Elimination of fault:
-- Exchange connecting cable
-- Exchange MFC
-- Exchange KCP