11 Oscilloscope (continued)
55 of 86
BetrHbKRC2FL--USA--Fehler 11.04.00 en
White
Active color: White
Red
The “active” color is permanently displayed at the bottom left of the screen.
You can “move” through the entire trace by using the arrow keys.
You can exit the display function again at any time by pressing the softkey “Cancel”.
11.1.3 The information window
Now press the softkey “Info”. A window is opened displaying further information about the
individual curves. The information window appears as follows for the example given above:
The color and the number of each curve are displayed in the first column.
The second column specifies the file from which the data for the curve have been read.
You can see the channel to which the curve has been assigned and the variable that it
represents in the columns “Channel” and “Name”.
The name of the color of the curve is displayed in the column “Color”.
The last column indicates whether the curve is visible or hidden.
Press the softkey “Info” again. The window is closed. You can switch between the two
functions by using this softkey.
To Next Page
Loading...
