User Manual
56 of 86
BetrHbKRC2FL--USA--Fehler 11.04.00 en
11.1.4 The softkey bar
The softkey bar has four levels in the function “Display”.
You can switch between these four levels by using the softkey “===>”.
11.1.5 The color softkeys
To make it as easy as possible to read the display, a maximum of eight different colors (blue,
green, white, red, magenta, brown, yellow and cyan) are shown.
Curves can be displayed or removed on the basis of their colors with the aid of the color
softkeys. This is done quite simply by pressing the appropriate color softkey.
Hide the blue curve, for example, by pressing the softkey “Blue”. Then open the information
window. Reminder: To do so, press the softkey “Info”.
Your action has been registered in the last column (far right). “Visible” now has the value “No”
for the blue curve.
Close the information window again and then make the blue curve visible once more. To do
so, press the color softkey “Blue” again.
If you press color softkeys while the information window is open, color assignments will
be canceled. The procedure for recovering canceled color assignments is described in
the section [Changing color assignments, Section 11.1.14].
Certain graphs can be removed by selecting the desired graph in the information window
and pressing the “Enter” key. More detailed information on this can be found in the section
[Switching curves on and off, Section 11.1.15].
To Next Page
Loading...
