12 Robot repair card (continued)
85 of 86
BetrHbKRC2FL--USA--Fehler 11.04.00 en
Box O
Enter, in this box, the value displayed on the operating hours meter at the time of the
fault.
The number of operating hours can be obtained by dividing the value of the system
variable $ROBRUNTIME by 60.
In order to read this system variable, press the menu key “Monitor” on t he user interface
and select the option “Modify variable” from the menu that is opened. The status window
illustrated appears in the programming window .
List boxes are opened
using the keyboard shortcut
ALT+↓ .
Fig. 10 Operating hours of the robot system
To display the value of a variable, position the cursor in the input box “Name”, using the
softkey “Name” and enter the name of the variable you wish to change, in this case
$ROBRUNTIME. Then press the Enter key to confirm this.
The value of the variable is now displayed in the field “Current value”.
To Next Page
Loading...
