4-6
Disk Mode Enhancements in Version 3
File List Dialog
If there are no files in the current directory, then the index is 0, and the number of files is also
zero:
Dir:\||||||||||||Sel:0/0|||||Index:|||0|
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||File|to|load:|||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
|Total:|0K||||||||||||||||||||||||||||||
Select||Root||Parent||Open|||OK|||Cancel
You will also see that there is a blank cursor bar, but no file names are displayed.
The maximum number of files that can be accessed within a single directory is 360. If you have
more files than this amount in a single directory, then you will not be able to view the entries
past index 360.
While in this dialog, pressing the CHAN/BANK buttons (to the left of the LCD display) will
scroll the file list in either the forward or backward direction by “pages” of 5 entries. It is often
easier to scroll the list this way when looking to see if a particular file is present in a directory.
Select
This soft button is used for multiple file selection in the Load, Delete, and Move functions. In the
display below, there are two files selected, as indicated by the asterisk (
*) after the .KRZ file
extension. If OK were pressed for the following screen,
Dir:\||||||||||||Sel:2/23||||Index:|||3|
|||||||||||||||||AXM||||||.KRZ||||122K||
|||||||||||||||||CHIME||||.KRZ|||||42K||
||||File|to|load:DOORS||||.KRZ*||3456K||
|||||||||||||||||JUNE27|||||||(dir)|||||
|||||||||||||||||LONGSMPS|||||(dir)|||||
|Total:21034K||||FLUTE||||.KRZ*||||.5K||
Select||Root||Parent||Open|||OK|||Cancel
the files DOORS.KRZ and FLUTE.KRZ would be loaded.
The Select button will toggle the selection, meaning that if you press Select on a given file, the
asterisk will go on if it is currently off, and vice-versa. Selecting can only be done for files, not for
directories. You can select as many files as you wish using the Select button. There is also a way
to select all files at once, or clear all file selections at once, using a double-press of the cursor
buttons:
• Left/Right cursor double-press: Select all files
• Up/Down cursor double-press: Clear all selections
Pressing either the Left or Right cursor individually performs a separate function for finding
directories, described below.
You can only select multiple files from within a single directory. Changing directories clears any
selections.
To Next Page
Loading...
Need help?
General
