Disk Mode Enhancements in Version 3
Saving Files
4-21
Saving Files
There are many enhancements to the process of saving files in Version 3 software. All of the
new features having to do with saving files are accessed by pressing the Save soft button on the
Disk mode page. In Version 3 you will see the following screen dialog when Save is pressed:
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
|||||Save|selection:200...299|||||||||||
||||||||||||||||||||300...399|||||||||||
||||||||||||||||||||400...499|||||||||||
||||||||||||||||||||500...599|||||||||||
Export|Macro||Object|NewDir||Ok|||Cancel
The meaning of the soft buttons in the Save|selection: dialog is as follows:
Export Save a sample or a song in an exported file format (AIFF, WAVE, MIDI Type 0).
Macro Save entries from the current macro table as a macro file (.MAC). This soft button
is only displayed if macro file recording is on.
Object Save selected objects from the K2000's RAM.
NewDir Create a new directory on the current disk, and return to this dialog afterwards.
OK Save all the objects from the highlighted bank, and optionally also save
dependent objects.
Cancel Exit from the Save function.
Export, Macro, and NewDir are all explained elsewhere in this guide. This section will describe
the process of saving K2000 objects into K2000 format disk files.
Saving Individual Objects
A new feature in Version 3 is the ability to select any group of objects in the K2000's RAM for
saving into a single file. In previous versions of software, saving was limited to groups of all
objects of all types within a single bank, all objects in the machine (Everything), or just the
master table. These options are still provided for convenience, and they operate the same as
always; you can scroll to the bank that you want to save (or else Everything or Master) and
press OK.
To save individual objects, from the above dialog, press Object. The K2000 will display a
scrollable list of all the objects in RAM, very similar to the display for the Load Object feature
(described previously):
Func:SAVE|||||Sel:0/8||||||||Index:|||1
|||||||||||||||||||||||||||||||||||||||
|||||||||||||||||||||||||||||||||||||||
Sample||500|Lo|Vocal||||||||A|3S|||250K
Sample||501|Hi|Vocal||||||||G|4S|||179K
Keymap||500|VocalsMap||||||||||||||176|
Program|500|Dry|Vocals|||||||||||||270|
Select||Next|||Type||Multi|||OK||Cancel
To Next Page
Loading...
Need help?
General
