Song Mode and Sequencing
The Song Editor (EditSong Pages)
3-41
Song Editor: The TRACK Page
This page offers 13 track-based editing functions:
For each function, there is a set of parameters to control how the function operates, and on what
region of the selected track(s). As usual, the top line of this page displays the selected track or
tracks. Select the available current track(s) for editing by using the CHAN/BANK buttons. Press
both of the CHAN/BANK buttons together to select all tracks.
Below is an example of the TRACK page for the Bounce function.
The screen is divided into two halves, with the right half being its own “window.” This is called
the Region/Criteria window. The parameters in this window are used to select the range of bars
to edit, as well as which the types of events to edit. The parameters in this window are largely
the same for most functions. However, for certain functions, certain parameters may not apply.
For example, Quantize and Transpose apply only to notes, while Remap applies only to
Controllers. In addition to the Region/Criteria window parameters, the Locate parameter also
appears for each function. Since these parameters are common to the various functions, we’ll
define them first. Then we'll describe the individual functions—along with the parameters
specific to each. these functions and parameters normally appear on the left side of the screen.
Two functions, (Quantize and Reference Quantize) have unique parameters that appear in the
Region/Criteria window. We'll describe those parameters along with the functions.
Once you’ve chosen a function and set the parameters to your liking, press Go. This executes the
editing function. You can then play the sequence to hear the results of your edit. If you don't like
your edit, simply exit the editor and press No when you’re asked if you want to save. If you do
like your edit, you can press Done and use the <more> buttons to get to Save, or just exit the
Song Editor and save the changes.
Of course, rather than exiting, you can go to another edit function. Keep in mind though, that if
you choose to perform more than one edit without saving, and you are not satisfied with one of
the changes you make, you will have to exit the editor without saving and then redo each of the
changes you made. That’s why it’s usually best to save after each successful edit.
Erase Shift
Copy Transpose
Bounce Change
Insert Thin
Delete Remap
Quantize Grab
RefQuant
EditSong:TRACK|||||||||||||||<>Track:1||
Function:Bounce||d|From||:||1:1|To:||2:1
DstTrack:1|||||||d|Events:Notes|||||||||
Mode||||:Erase|||d|LoKey|:C|-1||Hi:G|9||
|||||||||||||||||d|LoVel|:1|||||Hi:127||
|||||||||||||||||d||||||||||||||||||||||
Locate||:||1:1|||'%%^^^^^^^^%%%%%%^%%%%%
FromTo||Play|||Stop||||||||||Go||||Done|
Region/Criteria
window
To Next Page
Loading...
Need help?
General
