3-40
Song Mode and Sequencing
The Song Editor (EditSong Pages)
View
Brings you to the View page, where you can set the view filter parameters for the Event List.
EVENT:View||||||||||||||||||||||||||||||
Notes|||||:On|||||||Volume||||:On|||||||
PitchBend|:On|||||||Pan|||||||:On|||||||
ModWheel||:On|||||||Bank/Prog|:On|||||||
Data||||||:On|||||||Tempo|||||:On|||||||
Sustain|||:On|||||||SysEx|||||:On|||||||
Pressure||:On|||||||Other|||||:On|||||||
Toggle|AllOff|AllOn||||||||||||||||Done|
Use the View page to determine which events are visible on the EVENT page. The View page
shows several event types, each with a value of On or Off. Set an event type’s value to Off if
you don’t want to see it on the EVENT page. This prevents all events of that type from
appearing on the EVENT page—and from getting executed as you scroll through events.
By default, all events types are visible (they have a value of On). If you make any event types
invisible (a value of Off), the View soft button on the EVENT page changes; it’s enclosed in
brackets to indicate that some event types are invisible (as shown below).
||||||||||||||||||||||||||||||||||||||||
|Cut||||Copy||Paste||[View]|AllOn||Done|
The View page has four soft buttons of its own: Toggle, AllOff, AllOn, and Done.
Toggle
Switches the value of every event type; Off becomes On, and vice versa. This is useful when you
want to go back and forth between viewing a single event type (or maybe a few types) and
viewing everything but that type.
AllOff
Swithces the values of all event types to Off.
AllOn
Swithces the values of all event types to On.
Done
Returns you to the EVENT page.
AllOn
This button does the same thing as the AllOn soft button on the View page; it makes all event
types visible.
Done
Returns you to the COMMON page.
To Next Page
Loading...
Need help?
General
