4-34
Disk Mode Enhancements in Version 3
The Multiple Object Selector Page
Selection by Dependents
This mode is used to select a group of objects that are dependents of other objects.
Everything
Everything will include all objects in the list. You may prefer to use the All button for this
purpose.
Search String
This selection mode will ask for a search string to be entered, as soon as either the Toggle, Clear,
or Set button is pressed. The range for the selection/deselection will be any objects whose
names contain the search string, ignoring the case.
Search String mode is not available in Load Object.
Working with the Multiple Object Selector
The Multiple Object Selector can be helpful to avoid a lot of button presses and quickly allow
you select whatever group of items in the K2000's RAM that you want. It is available in all of the
related object management functions of Version 3.
Parameters Possible Values Function
Of
Current Item,
Selected Items
If set to Current Item, selection range is confined to those objects
in the object list that are dependents of the currently indexed item
(Current =), including the currently indexed item itself.
If set to Selected Items, then the selection range includes any
objects in the object list that are dependents of any currently
selected objects. The currently indexed item that is displayed is
ignored unless it is already explicitly selected (has an asterisk).
Specify
All,
All->Keymap,
All->Program,
Keymap->Sample,
Samples Only
This parameter is used to limit which dependent objects are
included in the selection range for the appropriate objects included
via the Of parameter. The normal setting is All, which means all
dependents are included. The other settings are primarily useful
when separating objects into different files for reloading later using
macros and Relink-by-Name.
If set to All->Keymap, then the selection range will include any
dependent objects down to the level of keymaps. That is, samples
will be excluded from the selection range.
If set to All->Program, then the selection range will include any
dependent objects down to the level of programs and effects.
Another way of saying this is that any Keymaps and Samples will
be excluded from the selection range.
Keymap->Sample cause the selection range to only include
dependent objects that are keymaps or samples.
Samples Only will just include sample dependents.
Current =
Type,ID, and name of the
currently indexed object
Displays the object that will be used if Current Items is the value of
the Of parameter.
To Next Page
Loading...
Need help?
General
