1-2
System Software Versions 2 and 3
Version 2 System Software
Major Features in Version 2
The major changes to the System software for Version 2 pertain to the sampling option:
• There’s an enhanced sample editor, with graphic waveform display, cut/copy/paste sample
editing, non-real time DSP functions, and numerous miscellaneous improvements.
• Use the new Sample Mode page for recording and auditing samples. This page is reached
with the Sample soft button in Master mode, or by pressing the MIDI mode button while in
the Keymap Editor.
• You can read samples of the following formats from floppy and/or SCSI disks:
• Ensoniq® EPS and EPS-16 Plus floppy and SCSI disks (and disks for similarly-formatted
instruments), including ASR-10 “Ensoniq” format files;
• Akai® S900, S950, and S1000 series floppy and SCSI disks (and disks for similarly-formatted
instruments);
• Roland® S750 and S770 SCSI disks;
• CD-ROM sample libraries.
If you’re loading these samples from floppy disks, Chapter 13 of the Musician’s Guide will tell
you most of what you need to know to load these samples. See
Reading Samples
on page 2-29 for
information about loading these samples via SCSI.
Sampling/Audio Features
• Sampling from digital or line level analog sources
• Phase locked stereo sampling, as well as mono left and mono right
• Four analog sampling rates: 29.4, 32.0, 44.1, and 48.0 KHz
• Gain control for analog sample input
• Analog sampling monitor lets you listen to your sampling source through the K2000
• SPDIF and AES/EBU digital input formats, using optical or coaxial cable; automatic sample
rate selection
• Stereo input meters (dB) with peak hold and clipping indicators
• Post-sampling clip report
• Direct or triggered sampling with pre-triggering and programmable threshold level
• Timed sampling, for a ten-second countdown before sampling starts
• Auto-stop sampling (programmable sampling time), as well as manual cancel
• Immediate auditioning of new and existing samples, and preview feature to build a keymap
and program from any sample (including ROM samples)
• Digital outputs for clean digital recording to DAT or other digital devices
• User-friendly design for quick sampling and retakes
To Next Page
Loading...
Need help?
General
