Disk Mode Enhancements in Version 3
Macros
4-37
The Macro Page
There can only be one macro table in the K2000's memory at any time. This object is created for
the first time by turning on Macro Record mode, from the MACRO page. The MACRO page is
directly accessible from the first Disk mode soft button menu; just press the Macro soft button.
DiskMode||||Samples:12313K||Memory:102K|
Path|=|\CYBER\||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
CurrentDisk:SCSI|2||||||||Startup:Off|||
||||||||||||||||||||||||||Library:Off|||
Direct|Access,|84MB|||||||||||||||||||||
Psyquest|PS-427||||||||XMC1.7|||||||||||
<more|||Load|||Save||Macro||Delete|more>
The following screen is what you will see if macro recording is off:
Func:MACRO|||||[|Off||]||||||Index:|||0|
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
Select|Modify||Load||Record||On||||Exit|
The top line displays the disk function (Func:MACRO), the current Macro mode
(|[|Off||]||), and an index value into the macro table: |Index:|||0|.
Macro Modes
The K2000 has 3 Macro modes: Record, Pause, and Off.
Off There is no macro object in the K2000 memory.
Record A macro object exists, and the K2000 records any file load operations that occur.
Pause A macro object exists, but the K2000 does not record any file load operations that
occur.
Note that whenever the macro mode is Off, there are two soft buttons labeled Record and On.
Pressing On will enable Macro Record mode, and then will return to the Disk mode page. As an
alternative, pressing Record will also enable Macro Record mode, but the display will remain on
To Next Page
Loading...
Need help?
General
