Setup Mode
Controllers
7-23
92–95 MIDI 92–95 MIDI Controllers 92–95
96 Note St Note State—sends 0 for off and 127 for on
97 Key St Key State—sends 0 for off and 127 for on
98 KeyNum Key Number—sends key number of the pressed key
99 BKeyNum Bipolar Key Number—sends the key number for the pressed
key relative to C4 (i.e., KeyNum - 60)
100 AttVel Attack Velocity
101 InvAVel Inverse Attack Velocity
102 PPress Poly Pressure (Poly Aftertouch)
103 BPPress Bipolar Poly Pressure—sends the poly pressure relative to 64
(i.e., PPress - 64)
104 RelVel Release Velocity
105 Bi-AVel Bipolar Attack Velocity—sends the attack velocity relative to
64 (i.e., AttVel - 64)
106 VTRIG1 Velocity Trigger 1—a legacy feature that uses a
predetermined velocity threshold as an on/off control source
107 VTRIG2 Velocity Trigger 2—a legacy feature that uses a
predetermined velocity threshold as an on/off control source
108 RandV1 Random (large range)
109 RandV2 Random (small range)
110 ASR1 ASR Envelope 1
111 ASR2 ASR Envelope 2
112 FUN1 Function 1
113 FUN2 Function 2
114 LFO1 FLO 1
115 LFO1ph LFO 1 Phase
116 LFO2 LFO 2
117 Data+MPr Data and Mono Pressure
118 FUN3 Function 3
119 FUN4 Function 4
120 AMPENV Amplitude Envelope
121 ENV2 Envelope 2
122 ENV3 Envelope 3
123 Loop St Loop State—sends a value of 0 when in the first loop of the
sample, and sends 127 thereafter
124 PB Rate Play Back Rate
125 Atk State Attack State—sends a value of 127 at the begin of the played
note’s attack, and then sends a value of 0 thereafter
Controller
Number
Corresponding
Destination
Name
Description
Table 7-5 Controller Destination List (Continued)
To Next Page
Loading...
Need help?
General
