Basic Operation
3-27
3
4 Enter the destination e-mail address.
NOTE: Destination can be specified using the
Address Book or the One-touch keys. Refer to
Specifying Destination on page 3-44.
5 Press the OK key. Completed. is displayed and the
screen returns to the basic screen.
NOTE: If the screen for confirming the entry of a new
destination (page 8-72
) is set to [On], a screen to
confirm the entered e-mail address appears. Enter the
same e-mail address again and press the OK key.
6 If there are additional destinations, press the
Confirm/Add Destination key. Repeat steps 2 to
5 to enter additional destinations. Up to 100
destinations can be specified.
Press [Exit] (the Right Select key) to return to the
basic screen.
Press the Confirm/Add Destination key to
confirm or delete the registered destinations.
Press the U or V key to select a destination and
press the OK key. Then, you can edit or delete the
destination.
Press [Exit] (the Right Select key) to return to the
basic screen.
7 Press the Start key. Transmission starts.
NOTE: If the screen for confirming the destination
before transmission (page 8-72
) is set to [On], the
Confirm Destination screen appears when the Start
key is pressed. For more information, refer to Confirm
Destination Screen on page 3-43.
Ready to send.
Dest.: 1
p
:sally@kyoceramita
N
1-sided 300x300dpi
[ Duplex ] [ScanRes.]
Dest. Confirm.:
a
b
*********************
p
aaaaaaaaa@kyoceram
N
p
bbbbbbbbb@kyoceram
N
[ Add ] [ Exit ]
p
Morgan@kyoceramita
N
To Next Page
Loading...
