Sending Functions
5-26
WSD Scan
WSD Scan saves images of originals scanned on this machine as files on a WSD-compatible computer.
NOTE: For information on operating the computer, refer to the operating system help for your computer.
To use WSD Scan, WSD Scan Setup (page 8-154) must be set to [On] in the network settings.
Installing the driver
1 Select Start button of the Windows display, and
then Network.
2 Select the machine displayed Multifunctional
Devices, and then right-click Install.
Installing of the driver starts.
3 After installing the driver, click Close.
Procedure using this machine
1 Press the Send key.
2 Place the originals on the platen or in the
document processor.
Displays the screen for sending.
NOTE: Depending on the settings, the address book
screen may appear. In this event, press [Cancel] to
display the screen for sending.
3 Press the U or V key to select [WSD Scan].
4 Press the OK key. WSD Scan appears.
5 Press the U or V key to select [From Oper. Panel].
Send to:
a
b
2
G
Folder(SMB)
3
H
Folder(FTP)
****************** ***
4
P
WSD Scan
WSD Scan:
a
b
1
From Computer
****************** ***
[ Exit ]
2
From Oper. Panel
To Next Page
Loading...
Need help?
General
