Default Setting (System Menu)
8-130
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
4 The Timer Settings menu appears.
5 Press the U or V key to select [Panel Reset
Timer].
6 Press the OK key. Panel Reset Timer appears.
7 Press the U or V key to set the Panel Reset Timer.
Set the amount of time before resetting the
message display on the panel in seconds. You
cannot use the numeric keys to enter this value.
8 Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
Unusable Time
You can specify the prohibition period to use.
Use the procedure below to set the Unusable Time.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
Login User Name:
L
b
*******************
Login Password:
[ Login ]
Timer Setting:
a
b
*********************
2
Sleep Timer
3
PanelReset Timer
[ Exit ]
1
Err. Clear Timer
PanelReset Timer:
D
b
(5 - 495)
******90*
sec.
Sys. Menu/Count.:
a
b
4
User/Job Account
5
User Property
*********************
[ Exit ]
6
Common Settings
To Next Page
Loading...
Need help?
General
