Default Setting (System Menu)
8-59
8
Optional Memory
If optional memory is installed, you can specify whether most of the memory is allocated to the copy function or
the print function.
Use the procedure below to adjust the Optional Memory.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the U or V key to select [Optional Memory].
4 Press the OK key. Optional Memory appears.
5 Press the U or V key to select [Normal], [Printer
Priority] or [Copy Priority].
Item Description
Normal The optional memory is allocated to the
copy function or the print function based on
a previously selected setting.
Copy Priority This allocates most memory to data
spooling for sort copy. When copy priority is
specified, the number of pages that can be
printed in sort copying increases.
Printer Priority The amount of memory allocated to RAM
disk memory and the amount of memory
allocated to drawing can be increased.
When print priority is specified, the
maximum value that can be set in RAM
disk mode increases.
Sys. Menu/Count.:
a
b
4
User/Job Account
5
User Property
*********************
[ Exit ]
6
Common Settings
Common Settings:
a
b
*********************
2
Default Screen
3
Sound
[ Exit ]
1
Language
Optional Memory:
a
b
*********************
2
Printer Priority
3
Copy Priority
1
*Normal
To Next Page
Loading...
Need help?
General
