Kyocera ECOSYS FS-C2126MFP - Page 209

Sending Functions
5-27
5
6 Select the destination computer from the computer
list.
Press [Detail] (the Right Select key) to see the
information of the selected computer.
7 Press the OK key to confirm the destination, and
then press the Start key. Transmission starts.
NOTE: To change the destination computer, press the
Back key and then press [Yes] (the Left Select key).
This brings you back to step 6.
NOTE: To use WSD Scan from your computer, press
[From Computer] in step 5 and then scan the original
from the computer.
Select Computer: a b
****************** ***
P Computer02
P Computer03
[ Cancel ] [ Detail ]
P Computer01
Press Start Key.
P :Computer01