Copying Functions
4-9
4
Use the procedure below to select the orientation when placing the originals on the platen.
1 Press the Copy key.
2 Place the originals on the platen or in the
document processor.
3 Press the Function Menu key. Function Menu
appears.
4 Press the U or V key to select [Orig.Orientation].
5 Press the OK key. Orig.Orientation appears.
6 Press the U or V key to select [Top Edge Top] or
[Top Edge Left].
7 Press the OK key.
Completed. is displayed and the screen returns to
the basic screen for copying.
8 Press the Start key to start copying.
Function Menu:
a
b
****************** ***
2
Collate
T
3
Duplex
T
[ Exit ]
1
Paper Selection
g
Orig.Orientation:
a
b
1
c
Top Edge Top
****************** ***
2
*
d
Top Edge Left
To Next Page
Loading...
