Default Setting (System Menu)
8-81
8
3 Press the U or V key to select [Off] or [On].
4 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
When KPDL(Auto) Is Selected for Emulation
When you select [KPDL(Auto)], set whether or not to output KPDL error reports. The default setting is Off.
Use the procedure below to make the setting.
1 In Emulation Set, press the U or V key to select
[KPDL(Auto)].
2 Press the OK key. KPDL Error Rpt appears.
3 Press the U or V key to select [Off] or [On].
4 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
Emulation Set.:
a
b
1
PCL6
2
KPDL
*********************
3
KPDL(Auto)
KPDL Error Rpt:
a
b
*********************
2
On
1
*Off
To Next Page
Loading...
