Kyocera ECOSYS FS-C2126MFP - Page 333

Default Setting (System Menu)
8-85
8
2 Press the OK key. The Printer menu appears.
3 Press the U or V key to select [Duplex].
4 Press the OK key. Duplex appears.
5 Press the U or V key to select [Off], [Bind Long
Edge] or [Bind Short Edge].
6 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
Copies
Set the default number of copies, from 1 to 999.
Use the procedure below to specify the default number of copies.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Printer].
2 Press the OK key. The Printer menu appears.
3 Press the U or V key to select [Copies].
Printer: a b
*********************
2 Color Setting
3 EcoPrint
[ Exit ]
1 Emulation Set.
Duplex:
a b
*********************
2 Bind Long Edge
3 Bind Short Edge
1 *Off
Sys. Menu/Count.:
a b
7 Copy
*********************
9 Send
[ Exit ]
8 Printer
Printer:
a b
*********************
2 Color Setting
3 EcoPrint
[ Exit ]
1 Emulation Set.