Default Setting (System Menu)
8-127
8
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
4 The Timer Settings menu appears.
5 Press the U or V key to select [Sleep Level].
6 Press the OK key. Sleep Level appears.
7 Press the U or V key to select [Quick Recovery]
or [Energy Saver].
8 Select [Quick Recovery] and press the OK key.
Completed. appears and you return to the timer
settings menu.
Select [Energy Saver] and press the OK key. The
detailed settings screen of Energy Saver mode
appears.
9 Press the U or V key to select the desired
function for energy saver.
The following functions can be set:
•Network
• USB Cable
• Card Reader
• RAM Disk
•NIC
10 Press the OK key. The setting screen of each item
appears.
Login User Name:
L
b
*******************
Login Password:
[ Login ]
Timer Setting:
a
b
*********************
2
Sleep Timer
3
PanelReset Timer
[ Exit ]
1
Err. Clear Timer
Sleep level:
a
b
*********************
2
Energy Saver
1
Quick Recovery
Energy Saver:
a
b
*********************
2
USB Cable
3
Card Reader
1
Network
Network:
a
b
*********************
2
Prohibit
1
*Permit
To Next Page
Loading...
Need help?
General
