Default Setting (System Menu)
8-163
8
1 In the Sys. Menu/Count. menu, press the U or V
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
2 The System menu appears.
3 Press the U or V key to select [Network Setting].
4 Press the OK key. The Network Setting menu
appears.
5 Press the U or V key to select [Secure Protocol].
6 Press the OK key. Secure Protocol appears.
7 Press the U or V key to select [HTTP Security].
8 Press the OK key. HTTP Security appears.
Sys. Menu/Count.:
a
b
1
Report
2
Counter
*********************
[ Exit ]
3
System
Login User Name:
L
b
*******************
Login Password:
[ Login ]
System:
a
b
*********************
2
I/F Block Set.
3
Security Level
[ Exit ]
1
Network Setting
Network Setting:
a
b
*********************
8
Host Name
9
LAN Interface
[ Exit ]
7
Secure Protocol
Secure Protocol:
a
b
1
SSL
2
IPP Security
*********************
[ Exit ]
3
HTTP Security
HTTP Security:
a
b
1
HTTP/HTTPS
*********************
2
*HTTPS only
To Next Page
Loading...
Need help?
General
