Appendix-3
Precautions for Handling the Memory Module
To protect electronic parts, discharge static
electricity from your body by touching a water pipe
(faucet) or other large metal object before handling
the memory module. Or, wear an antistatic wrist
strap, if possible, when you install the memory
module.
Installing the Memory Module
1 Turn off the machine and disconnect the power
cord and interface cable.
2 Remove the right cover with a piece of metal
similar to coin.
3 Open the inside cover.
4 Remove the memory module from its package.
Correct
Incorrect
To Next Page
Loading...
Need help?
General
