Kyocera ECOSYS FS-C2126MFP User Manual

Preparation before Use
2-6
4 Connect one end of the supplied power cable to
the machine and the other end to a power outlet.
IMPORTANT: Only use the power cable that comes
with the machine.
5 Replace the Power Cord Connector Cover.
6 Turn the main power switch on. The machine
begins to warm up.
7 When connecting the network cable, configure the
network. For details, refer to Network Setup (LAN
Cable Connection) on page 2-14.
On
Off

Kyocera ECOSYS FS-C2126MFP Specifications

General

Brand	Kyocera
Model	ECOSYS FS-C2126MFP
Category	All in One Printer
Language	English