Kyocera ECOSYS FS-C2126MFP - Page 63

Preparation before Use
2-15
2
3 In the System menu, press the U or V key to
select [Network Setting].
4 Press the OK key. The Network Setting menu
appears.
5 Press the U or V key to select [TCP/IP Settings].
6 Press the OK key. The TCP/IP Settings menu
appears.
7 Press the U or V key to select [TCP/IP].
8 Press the OK key. TCP/IP appears.
9 Press the U or V key to select [On] and then press
the OK key.
Completed. is displayed and the screen returns to
the TCP/IP Settings menu.
10 Press the U or V key to select [IPv4 Setting].
System: a b
****************** ***
2 I/F Block Set.
3 Security Level
[ Exit ]
1 Network Setting
Network Setting:
a b
****************** ***
2 NetWare
3 AppleTalk
[ Exit ]
1 TCP/IP Settings
TCP/IP Settings:
a b
****************** ***
2 IPv4 Setting
3 IPv6 Setting
[ Exit ]
1 TCP/IP
TCP/IP:
a b
1 Off
****************** ***
2 *On
TCP/IP Settings:
a b
1 TCP/IP
****************** ***
3 IPv6 Setting
[ Exit ]
2 IPv4 Setting