Kyocera ECOSYS FS-C2126MFP - Page 66

Preparation before Use
2-18
6 Press the OK key. The TCP/IP Settings menu
appears.
7 Press the U or V key to select [TCP/IP].
8 Press the OK key. TCP/IP appears.
9 Press the U or V key to select [On] and then press
the OK key.
Completed. is displayed and the screen returns to
the TCP/IP Settings menu.
10 Press the U or V key to select [IPv4 Setting].
11 Press the OK key. The IPv4 Setting menu appears.
12 Press the U or V key to select [DHCP].
13 Press the OK key. DHCP appears.
14 Press the U or V key to select [Off] and then press
the OK key.
TCP/IP Settings: a b
****************** ***
2 IPv4 Setting
3 IPv6 Setting
[ Exit ]
1 TCP/IP
TCP/IP:
a b
1 Off
****************** ***
2 *On
TCP/IP Settings:
a b
1 TCP/IP
****************** ***
3 IPv6 Setting
[ Exit ]
2 IPv4 Setting
IPv4 Setting:
a b
****************** ***
2 Bonjour
3 Auto-IP
[ Exit ]
1 DHCP
DHCP:
a b
1 Off
****************** ***
2 *On