Installing and Setting up the Machine > Command Center RX
125
Creating a New Custom Box
NOTE
An optional SSD is required to use the Custom Box.
1
Display the screen.
1 Launch your Web browser.
2 In the address or location bar, enter the machine's IP address or the host name.
Click in the following order to check the machine's IP address and the host name.
[DeviceInformation] in the home screen > [Identification/Wired Network]
3 In the [Document Box] menu, click [Custom Box].
4 Click [Add].
2
Configure the Custom Box.
1 Enter the box details.
Enter the information for the custom box you want to register. For details on the fields to populate, refer
to the following:
➡ Command Center RX User Guide
2 Click [Submit].
To Next Page
Loading...
